Types of waste and its contents

First, viewed from the origin of the substances they contain. Broadly speaking, garbage can be classified into two groups: organic waste ie waste that comes from the objects or living things. For example, the remaining vegetables, fruits and leaves. Inorganic waste, ie waste that comes from the objects or substances to death. For example, cans, plastic, metal, glass. Berangkal could also be included in this group. Waste of this type are difficult destroyed and many processed hard. To process this waste and high technology costs.Second, judging from its source; waste can be divided into three kinds, namely household waste is waste generated from households, industrial waste, including waste of industrial processes, and waste of living things, all kinds of things effluent from living things.

Waste process technology

Waste that has been stockpiled at the site of final disposal (landfill) can experience the process continued. The technology used in the general process is the first advanced technology, combustion (incinerator). Technology will produce byproducts of scrap metal (scrap) and steam into electrical energy can be conserved. Another advantage of this technology according to the Jakarta Sanitation Office, can reduce the volume of waste around 75% – 80% of the waste source segregation without due process. Ash or slag from combustion is quite dry and free of decay and can directly be taken to the landfill on vacant land or swamp areas as pengurug material. And on a fairly large installation with a capacity of 300 tons / day can be equipped with electrical energy power plants so that approximately 96,000 MWH / year generated can be utilized to reduce the cost of the process. Second, technology composting (composting). In principle composting technology is the following, which do not lapuh waste such as glass, plastic, metal and concrete blocks and thrown aside. So we are left that can be weathered. Next litter dihancurleburkan using a special machine until blended, so that the process pembusuksn by microorganisms can be run well, then dumped trash on a regular basis in a closed stretch of which can be monitored temperature, humidity and air flow rate using a special tool. This treatment will make the process of garbage decomposition takes place optimally. Although this can be done in a simple decay. Waste that has been milled so it is spread out enough sunlight for several days until completely decomposed. Compost in the making coated with mud bottom of the river, but the result is much better than if it is not coated with mud. This composting process usually lasts between 2 days to 6 weeks, depending on how penangannanya. Once the compost is “finished”, immediately dried and then milled. Once properly packaged, then the compost is ready for market. Third, technology landfill (land fill). This technology is old. Waste collected from households and markets low soil used to hoard. Rubbish dumped just piled up, and then leveled and compacted. After the peak at the desired height of landfill is stopped. Should be utilized types of waste that is not easily decomposed, such as paper, lumber, pieces of iron, tin cans and so on. Because if it’s garbage rotting garbage mixed with a very easy to rot will cause odor. After reaching a certain height immediately under the soil. Soil layer is at least as thick as 60 cm. Destruction in this way (sanitary landfill) is costly, but safer and do not harm people’s lives. Fourth, technology recycling (recycling). Rubbish that would still be processed again, levied and collected. Examples are paper, cardboard, glass, bottles, metals, plastics and so on. Used goods can be shipped to a recycling plant, so the junk that you want can be processed into raw materials, which can produce recycled products such as cartons, cardboard packaging, tools and home appliances from plastic and glass.How to recycle paper, the papers collected separately in plastic. Then brought to the recycling of paper. Then the paper is mixed with water, heated and made pulp. Ink residue is separated to improve quality. Finally, the resulting recycled paper. Once cut and packaged in a certain size, the paper can be marketed again.

Another benefit trash

Waste not only be used as compost for organic fertilizer, but also can be processed into bio-energy coal, biomass and energy to electricity. Further waste can be used as accessories items, functional items and as building material. Processing waste into electrical energy has been prevalent in many countries, but in Indonesia from landfill gas facility is relatively new. At present the project to produce electrical energy from waste is being built in Bali. British investors, Navigat Organic Energy Indonesia (NOEI), will establish an integrated waste management installations as producing electricity to Denpasar, Badung, Gianyar and Tabanan. The project will process waste by 500 tons per day and get the highest electricity 5-8 megawatts. The technology used is landfill technology. Process, making biogas obtained from waste through a gas engine into electrical energy conserved. At first all the waste backfilled with soil, then through a pipe that is placed in it, methane gas captured and used to dry the waste. Thus it will dry garbage pile. The liquid that comes out during the process accommodated and managed in a particular installation or a water treatment so as not to cause pollution. For new waste, the process is sorted first. Wet waste such as wood, leaves, shredded paper first, then put in a digester (dryer) which will produce biogas and compost. This technology is called Anaerobic Digestion. While dry waste like plastic will be processed by pyrolysis technology and gassfication, ie with high heating without oxygen which get the highest gas and used to drive turbines. City government also plans to implement the system waste to energy (WTE), which will be built in four locations; Marunda, Pulo Gebang, Ragunan and Duri Kosambi. With this expected in Bantar Gebang garbage can be reduced from 6250 tonnes to 1000 tonnes per day. In addition, it also can be made waste building materials, such as the size of a brick red brick, concrete blocks, paving blocks, tiles, terrazzo and tile.

The process of manufacture of building materials

1. The process of making bricks, which is composed of garbage and berangkal (debris).Both of these materials must be processed first. Burn or destroy the incinerator. If there is no incinerator, the combustion process can be done elsewhere, eg in the yard or in special containers such as drums. In addition to burning, waste can also be chopped with a machete or cleaver. Enumeration carried out in a special container, for example in the basin soil. Enumeration is not as good as the result of arson and took a long time.Unfortunately in those places are not all available waste disposal incinerator. Berangkal destruction process can be done in a special milling machine, can also be done manually.Destruction of the milling machine is relatively more efficient and effective, less time dibutuhka. Comparison of materials for making concrete blocks, trash that has been destroyed (50%), which has been milled berangkal (35%), cement (10%), and enough water (5%). Furthermore, the materials were mixed and stirred. Digesters do not be too thin or thick. After so mortar is inserted in the printer tool, flatten the top. After that remove the blocks that have been so from the printing press to make holes in concrete blocks, use an iron pipe. Penususksn should be performed when a new print tool contains a half.

2. In principle, the manufacture of brick with brick-making. The composition ratio of materials identical to adobe. Printing equipment printing equipment can be used non-trash red brick.

3. The composition of the necessary ingredients in making different species composition tile brick. Concrete block and brick using mortar type of rough. If the type of tile requires a subtle blend with the following composition, waste is destroyed (45%), berangkal ground (30%), cement (20%), and enough water (5%). How made, after the mortar so, then put in tile printing equipment. Previously covered by a plastic molding tools and smeared evenly across the solar surface of the plastic. Padatkan and smooth with an iron or steel. Puree with a smoothing tool. So gentengpun already finished.

4. Paving blocks made from mixing two types of mortar, the type of rough and smooth types. Comparison of these two types of 1:2. Every single part type premises finely mixed two parts of coarse type. Mortar that has been so incorporated into the molding tool let o’clock o’clock-solid. Flatten the surface with limbatan. How to remove the paving blocks with the help of the board. Reversal of the printing press, press the base while pulling the handle.

5. Materials needed in the manufacture of tiles consists of trash and debris berangkal, ordinary cement, white cement, cement dye, lime milled soap and water. Especially for trash and berangkal should be halved, the rough and smooth. For that waste should be sifted with a sieve berangkal maximum size of 2 mm hole. Use of these materials was not at once but divided into five types of mortar: Digesters to 1: composed of garbage and berangkal smooth and regular cement with a composition of 3: 1. Aukan to 2: composed of garbage and berangkal coarse and ordinary cement with a composition of 5: 1.Digesters 1 and 2 is used for all types of tiles. Mortar to 3: consists of milled lime and white cement with a composition of 2: 1. Digesters are used for this type of tiles wavel.Digesters to 4: consisting of white cement, tiles and soapy water dyes. Every 1 kg of white cement require soapy water 1 liter with pewararna taste. Digesters are used to make tiles and flower wavel. Digesters to 5: consists of ordinary cement, black dye and soapy water.Every 1 kg of ordinary cement takes 3 liters of soapy water with a black dye to taste.Digesters are used to create flowers and plain tiles. Then enter into the first molding tool is coated with an oiled plastic solar. To make the process of the simplest plain tiles. Enter the fifth as thick as 4 mm mortar. This is for the head. Then the mixture followed by 4 mm thick is also unity. Then enter the second mortar 25 mm thick. This is for the legs. Once this process is complete, stir the mixture kemuadian earlier in the press. Remove the finished tiles.

6. Such as tiles, terrazzo also consists of the head and legs. Materials to make the head is white cement, limestone rollers, terrazzo stone and soapy water. The composition 1:2:1 with soapy water to taste. The next process similar to the process of making tiles.Combine the ingredients needed in the manufacture of the head. Stir until thick, like a mortar to mengecor. Place a special diwadah. Then prepare the mortar for the legs.Prepare the mold. Coat the entire inner surface with a thin plastic. Apply solar. Enter the mortar section 4 mm thick head. Flatten. Enter a 5mm thick mortar unity, followed by two 20 mm mortar. Then preslah. Remove the terrazzo and bring relocation.

The development of information systems in human life as human civilization itself until finally know the term Information Technology (IT / Information Technology). Starting from the form of meaningless pictures on the walls, the inscriptions, until the information became known as the Internet. The information presented dikekola and continue to be developed, from the information as simple as merely describes a state, to the strategic information such as combat tactics.

Look after the development of such information, we will examine briefly the history of information technology in an effort to get the integrity of science and knowledge about information technology. The history of technology can be divided into pre-history, the history, and modern times.

Information technology is a combination of hardware technology (hardware) and software (the software). Development of hardware technology tends toward smaller sizes with high capability and capacity. But the effort is relatively more affordable price. The development of information technology can improve performance and enable a variety of activities can be performed quickly, precisely and accurate so that it can improve work productivity. The development of information technology has led to various types of activities based on technology, such as: e-government, e-commerce, e-education, e-medicine, e-laboratory, and others, all of which were based electronics.

Information Technology is a technology used to process the data, include: processing, obtain, compile, store, manipulate data in various ways to produce quality information. Information required will be relevant, accurate, and timely, which is used for personal, business, and strategic governance for decision making. This technology uses a computer to process data, the network system to connect one computer to another computer as needed.

Supported by data telecommunication information technology can be deployed and accessed globally. The role that can be provided by the application of information technology is to get information for personal life such as information about health, hobbies, recreation, and spiritual. Then for professions such as science, technology, trade, business news, and professional associations. Means of cooperation between the person or group with one other person or group without knowing the limits of distance and time, country, race, economic class, ideological or other factors which may inhibit exchange ideas. The development of information technology spurred a new way of life, of that life begins until the end, life as it is known as e-life, meaning life has been influenced by a variety of needs electronically. So now being lively with various terms that begin with the prefix e as e-commerce, e-government, e-education, e-library, e-journal, e-medicine, e-laboratory, e-biodiversitiy, and still others who based electronics.

The global economy also follows evoluasi of agrarian land with the main characteristic is the most dominant factor of production. Through the invention of the steam engine, the global economy has evolved toward an industrial economy with the main characteristics of capital as the most important production factor. Centuries now, humans tend to occupy a central place in the production process based on knowledge (knowledge based) and focuses on the information (information focused). Telecommunications and informatics play a role as a key technology (technology enablers). The development of information technology is so rapid, allowing the implementation of the ways a more efficient production, distribution, and consumption of goods and services. It is this process that brings people into the community or economic information is often referred to as post-industrial society. In this information age, physical distance or geographical distance is no longer a determining factor in human relations or inter-agency effort, so the world becomes a global village or the Global Village.

Physical, psychological and social. Examples of Self-concept as follows:
1. ’My face is ugly ”Perceptions of Physical”
2. ”I’m Smart” Perceptions of psychic
3. Friends - friends love me ”(social perception)

The concept of a person’s development is influenced by factors of experience interactingwith other people or factors of attitude and treatment of others, especially parents. Good treatment, such as affection, attention. and praise. Tend to form a positive self-concept.While the negative treatment, such as the nature of hostile derision (ridicule) rebuke tend to form a negative self-concept.

Personal characteristics and behavior of people who have positive self-concept:

a. Feel confident or confident in their ability to overcome his problems.
b. Feeling equal to others
c. Compliment the other person can receive
d. Being able to repair itself when a failure
e. Having concern for the interests of others.

Characteristics - Personal characteristics and behaviors that have a negative self-concept:

a. Do not want criticism of others.
b. Glad the praise of others.
c. Like disparaging or criticizing others.
d. Feeling unwelcome, rejected or ignored others.
e. Be Pessimistic in an atmosphere of competition, or pessimistic about the future.

2. How to Develop Self

a. Taking care of themselves, maintain cleanliness and personal hygiene.
b. Learning, both at home and school learning.
c. Following the coursework is to support
d. Active in eskul
e. Active in Osis
f. Nice to listen to the development of Science.
g. Refrain from the association is not good.

There are slim9 pill which can help you to answer your question. This product can help you to reach the slim body that you dreamt and it will not give you a harm effect in your body. This product uses a mixing of natural product, such as: green tea, ginger, dandelion root, and other natural products. Slim9 pill are clinically proven for a slim product. You do not need to worry about the effect of this product. Basically this is a weight loss pill, but with the natural ingredients, this product also gives you more energy to do your daily activity and it will make your metabolism faster, so that you can have health body.

Why are you still doubt with this? Just follow the links provided above, and you will get the answer of your questions related to weight loss product. This product is safe and recommended. In that link there are a contact number, so if you have a question you can directly call it and you will get the answer. Just click, call, order, and wait. Losing weight never be as simple as that. So, do not wait until you become fatter and fatter. Come to that site right now.

For you who have a small size of penis, don’t worry about that. There is a pill which can help you to enhance the size of your penis. Sinrex is the name of the pill. Sinrex is a kind of media which can help you to enhance the size of your penis by swallow it like any other medicines. By using this pill, you will get other advantages not just in the enhancement but also in your sexual life. You will get increasing volume of your semen volume until 420% than usual. This pill also gives you stronger, longer, and harder erections of your penis. And it will also increase your sexual stamina and it will be last longer. And you will experience an explosive orgasm with this pill. This pill is approved by internationally doctor in male enhancement pills.

So why wait? Just follow the links above and they will bring you to the answer of your sexual program. And for those who do not have a problem in their sexual life, that links will gives you alternative to improve it. Just click and buy male enhancement pills, there are so many great offers there. Just come and there are contact link provided in the site to help answer your question about penis enhancement pill.